JanelaCerta.ptPT

PVC window installation in Amadora

Tell us where, and companies in your area send you quotes. Measure your opening on the drawing and leave your phone number. Free, no obligation.

Town
Amadora
District
Lisboa
Position
38°45′ N · 9°14′ W
1200 mm1200 mmJ1J1 · Tilt and turn, 2 sashesPVC · White · double glazing1.44 m²
  • Tilt and turn: opens to the side and tilts for fresh air.

What will it cost? Start with the sizes

Window type

Material

Material

Colour

Colour

Sizes

Between 600 and 1800 mm

Between 300 and 2200 mm

A rough size is fine.

Extras

Glass

Window schedule

Each row is one window. Tap its mark (J1, J2…) to edit it.

No windows on the list yet. Set one up and tap “Add to the list”.

Pick a type and sizes, then add the window to the list to see the square metres.

Get quotes

Request form

JanelaCerta.pt

We already know the town. Change it if it is another one.

Free. No obligation.
Large letters spelling Amadora on a lawn, with pine trees and a building behind
Sign with the name of the city, in a green spacePhoto: Dvfernandes · CC BY-SA 4.0 · Wikimedia Commons

About Amadora

Amadora lies north-west of Lisbon, next to Sintra, Oeiras and Odivelas. According to Wikipedia, since 2021 it has had the highest population density in Portugal, with 7,637 people per square kilometre. The relief is gentle hills, between 50 and 200 metres, with the Mira hills in the far north and a depression in the middle.

The territory was born from the split of the old parish of Benfica, in 1885-1886. The main nucleus was Porcalhota, on the royal road that linked Lisbon to Sintra, and it later got a railway station. In 1907 the various farmsteads were renamed Amadora. It became a town in 1937 and only in 1979 its own municipality, after belonging to Oeiras.

By 1962 it was the most populous place on the Sintra line, because of people arriving from the countryside, industry and the closeness to Lisbon. Today it is mostly residential, but it has retail parks, factories, such as the glassworks at Falagueira-Venda Nova, and company headquarters.

There are parks such as Parque Central and Parque Aventura, where a stretch of the Águas Livres Aqueduct can be seen. Amadora BD, a comics festival, has run since 1989. Among tall buildings, busy streets and green spaces, a window in Amadora has to deal with noise and heat more than with wind.

What the climate of Amadora asks of windows

According to Wikipedia, Amadora lies in a transition area between two kinds of Mediterranean climate, with a slight influence from the sea. The mean annual temperature is about 16 °C and about 740 mm of rain falls a year. Wikipedia does not describe the seasons in more detail, so the climate of the Lisbon region applies: hot, dry summers and cool, rainy winters. Being a few kilometres from the coast, the sea breeze tends to arrive weaker.

Amadora is a small, heavily built-up municipality north-west of Lisbon, with low hills and little wind. Noise, dust and the heat of the facades count more than the rain.

The drawing shows a flat in a city block. The four letters mark the air, the noise, the cold and the sun, and the table below says how the options fare.

Section notes Sample text · to be reviewed
  1. Still air and dust

    Amadora sits among low hills and many buildings, far from the coast, so the wind is weak on many streets. With the air stiller, dust from building sites, roads and dry ground gets in through gaps and settles on tracks and sills. A good seal and a simple clean of the frames already make a difference.

  2. Traffic and train noise

    The town grew along the royal road and the railway to Sintra, and even today the avenues and the line are close to many homes. The noise is daily, early in the morning and in the late afternoon. Double glazing and good seals lower the sound, but the shutter box needs attention too.

  3. Rain and cold in the blocks

    With about 740 mm of rain a year, almost all in autumn and winter, walls turn damp and cold. In apartment blocks, the old frame and the shutter box are the coldest spots in the room, and that is where drops and stains appear. A new window only solves it if these spots are treated.

  4. Sun on the facades

    Density is very high and there is little tree shade near the homes. On south and west facades, the summer sun heats the walls and then the rooms, even at night. Outside blinds and a light colour on the frame help keep the flat cooler.

Section of a house by the estuaryOn the left, the estuary with the hills behind it, the wind and salt in the air. In the middle, the wall with the window in section. On the right, the living room. Wind and salt arrive from the water against the window. Indoors, damp air rises. The summer sun comes through the glass and warms the room.abcd
Section · flat in a city block Estuary · Wall · Room
Bright bedroom with a casement window and a white curtain stirring
AI-generated illustrationBedroom with plenty of natural light · Illustrative image, not a photo of this place.
Climate sheet for Amadora: the level of each condition, from low to high
ConditionLevelClimate sheet
SummerHighHot, with a lot of wall in the sun.
WinterMediumCool, without extreme cold.
RainMediumRain mostly in autumn and winter.
WindLowLess exposed than the coast.
SunHighPlenty of sun on south and west facades.

Levels for comparison, not measurements.

SourcesWikipédia: Amadora

Climate zone of Amadora

Portugal's building energy rules put every place in a winter zone (I1 to I3) and a summer zone (V1 to V3). In Amadora the zone depends on the altitude of the building, so we show the ranges.

Winter zone by altitude in Amadora and the maximum Uw of windows
Building altitudeWinter zoneMaximum Uw, W/(m²·°C)
up to 243 mI12.80
from 244 to 537 mI22.40
above 538 mI32.20

Summer zone: V3: up to 78 m; V2: from 79 to 278 m; V1: above 279 m

Maximum solar factor of windows (gtot,máx): up to 78 m, V3: 0.10 in weak-inertia spaces and 0.50 in medium or strong inertia spaces; from 79 to 278 m, V2: 0.10 in weak-inertia spaces and 0.56 in medium or strong inertia spaces; above 279 m, V1: 0.15 in weak-inertia spaces and 0.56 in medium or strong inertia spaces. The value is for the opening with the solar protection fully activated. North-facing windows are exempt. What is the solar factor?

The maximum Uw applies to windows in housing in new and renovated buildings (Portaria n.º 138-I/2021), with exceptions, for example conservation works. The zone is calculated with the Manual SCE method, from the region (NUTS III) and the altitude, not by parish. Ask the designer or an SCE expert to confirm the one for your building. Checked on 19 October 2026. What is Uw?

Solutions table for Amadora

Amadora · conditions and solutions Sample text · to be reviewed
Solutions table for Amadora: how each material and each glazing responds to local conditions
WindowGlass
Local conditionPVCAluminiumDouble glazingTriple glazing
Still air and dust
SuitableGood. Good seals let in less dust and less draught.SuitableFine, if the seals are good and well fitted.SuitableWith less wind, glass matters more for noise than for air.It dependsUseful on very exposed facades. Not always needed.
Traffic and train noise
SuitableGood seals help lower the street noise.It dependsDepends on the seals and the thermal break. Ask.SuitableCuts noise well. Panes of different thickness help more.It dependsNext to a railway or avenue it may pay off. Glass and seal decide.
Rain and cold in the blocks
SuitableGood. A well-sealed window and shutter box keep the cold out.It dependsDepends on the thermal break. Check the shutter box.SuitableReduces the cold near the window and water on the glass.It dependsUseful on north facades. Ask the installer.
Sun on the facades
SuitableGood in buildings without shade. A light colour heats up less.It dependsDepends on colour and thermal break. Dark heats up more.It dependsFor heat there are solar-coated glasses. Ask.It dependsHolds heat in. On west sides, ask about a solar coating.
  • Suitable
  • Needs care
  • It depends

In flats, the installer should also look at the shutter box and the wall finish. The rest is confirmed on site.

Homes in Amadora

The homes in the area change what is worth asking of the windows.

  • Older apartment blocks

    There are many apartment blocks of different eras, close to one another. In older buildings, worn frames and shutter boxes let in cold and noise, and every opening should be measured on site. Always ask for a visit before the final price.

  • Historic centre

    Around the old Porcalhota, by the station and the royal road, lies the oldest part of town. Walls there can be thick and uneven, and the edge finish between window and wall needs more care than in recent blocks.

  • Detached and semi-detached houses

    In areas further from the avenues there are houses, with more wall facing outwards. Openings are larger and catch more summer sun and more winter cold. Good glass and an outside sun shield count more than the type of frame.

Local notes

Noise

Near the railway line and the avenues, noise is felt in the morning and in the evening. Ask the installer to talk about noise, not only cold.

How it works

  1. Tell us what you need

    Measure the opening on the drawing and confirm your town.

  2. We pass your request to the right companies

    We process your request and send it to the local companies that best fit your town and what you asked for.

  3. The companies contact you with quotes

    They get in touch and send you their quotes and offers. Compare them and choose, with no obligation.

Measure my window

We do not make or fit windows. We pass your request on and explain.

Installer measuring a window opening with a tape measure in an empty room
AI-generated illustrationThe installer confirms the sizes on site.

Towns near Amadora

Do not live right in Amadora? These are the municipalities and places around it.

Cannot find your area? Write it in the request.

White wall with a blue-framed window and a pot of red geraniums
AI-generated illustrationWhitewashed house with a small window · Illustrative image, not a photo of this place.

Buildings close together and little shade

According to Wikipedia, Amadora is the most densely populated municipality in the country. On narrow streets between tall buildings, little light reaches the window, and the neighbour’s window is often close. That changes the choice: a slim frame lets in more light, and glass that does not darken too much counts a lot for the flat. If your window faces a light well or an inner courtyard, tell the installer, because the air and noise there differ from the street. Also ask whether the window faces a tree-lined street or a wall, because shade in front changes the summer heat.

The Sintra line, the metro and everyday noise

Amadora is on the Sintra railway line, and the metro has been growing in the municipality. People who live near a station or an avenue with buses notice noise at certain times of day. On the site visit, the installer can listen and see where the noise comes from: the street, the train or the shutter box. Ask for a window sealed all the way round, double glazing and a well-sealed edge with the wall. If the noise is mostly at night, say so: the installer may recommend a different solution from that for someone who only hears it by day.

General notes

In many buildings the facade has rules, for example on colour and design. It is usually the residents' administration that decides. Ask for an answer in writing before requesting quotes. If the building is older, also ask whether there is any plan for the facade.

Related guides

Prefer to get quotes?

Leave your name and phone number. Your town is already filled in. Free, no obligation.

Free. No obligation.

Do you install windows in Amadora?

Receive requests from customers in your area.

I want to be a partner

Free. No obligation.

Get quotes